| Publications:
1 • Ashish Kumar Srivastava, Ambuj Saxena, Amit Rai Dixit, Investigation on the thermal behaviour of AZ31B/waste eggshell surface composites produced by friction stir processing, 2021, Composites Communications 28(1):100912, DOI: 10.1016/j.coco.2021.100912; IF7.685
2 • Srivastava, Ashish Kumar, Sandeep Tiwari, Praveen Pachauri, Nakul Gupta, Bdy Sunil, and Ajay Kumar. "Bonding strength and microstructural features of Al5083-AZ31B alloys laminated sheet through friction stir additive manufacturing." Journal of Adhesion Science and Technology (2023): 1-14. 2.5
3 Ashish Kumar Srivastava, Suryank Dwivedi, Akash Nag, Deepak Kumar, Amit Rai Dixit, Sergej Hloch, Microstructural, mechanical and tribological performance of a magnesium alloy AZ31B/Si3N4/eggshell surface composite produced by solid-state multi-pass friction stir processing, Materials Chemistry and Physics, Volume 301, 2023, 127694, https://doi.org/10.1016/j.matchemphys.2023.127694. 4.6
4 Srivastava, Ashish Kumar, Akash Nag, Suryank Dwivedi, Amit Rai Dixit, and Sergej Hloch. "Effect of eggshell powder on the microstructural and thermal behavior of Al7075/waste eggshell surface composites produced by solid-state friction stir processing developed for potential thermal applications." The International Journal of Advanced Manufacturing Technology 127, no. 3 (2023): 1243-1261. 3.4
5 • Dixit, Amit Rai, Ashish Kumar Srivastava, Suryank Dwivedi, Akash Nag, and Sergej Hloch. "An investigation on microstructural features and bonding strength of magnesium-based multifunctional laminated composite developed by friction stir additive manufacturing." The International Journal of Advanced Manufacturing Technology (2023): 1-16. 3.4
6 • Ravi Prajapati, Suryank Dwivedi, Deepak Kumar, Ashish Kumar Srivastava, Amit Rai Dixit, Investigation on Bonding Strength and Tribological Performances of Ceramic Laminated AA6063 Composite Developed by Friction Stir Additive Manufacturing, International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, https://doi.org/10.1007/s40684-023-00545-0 4.2
7 Ashish Kumar Srivastava, Amit Rai Dixit, Manish Maurya, Ambuj Saxena, Nagendra Kumar Maurya, Shashi Prakash Dwivedi, Rajesh Bajaj, 20th Century Uninterrupted Growth in Friction Stir Processing of Lightweight Composites and Alloys, Materials Chemistry and Physics, Volume 266, 2021, 124572. 4.778
8 Ashish Kumar Srivastava, Nilesh Kumar, Amit Rai Dixit, Friction stir additive manufacturing – An innovative tool to enhance mechanical and microstructural properties, Materials Science and Engineering: B, Volume 263, 2021, 114832. 3.407
9 Ashish Kumar Srivastava, Nagendra Kumar Maurya, Amit Rai Dixit, Shashi Prakash Dwivedi, Ambuj Saxena, Manish Maurya, Experimental investigations of A359/Si3N4 surface composite produced by multi-pass friction stir processing, Materials Chemistry and Physics, Volume 257, 2021, 123717. 4.778
10 Ashish Kumar Srivastava, Suryank Dwivedi, Ambuj Saxena, Deepak
Kumar, Amit Rai Dixit, Gyanendra Kumar Singh, Javed Khan Bhutto, Rajesh
Verma, Tribological characteristics of Al359/Si3N4/Eggshell surface composite
produced by friction stir processing, Coatings 2022, 12(9), 1362; https://doi.org/10.3390/coatings12091362
3.236
11 Ashish Kumar Srivastava, Nilesh Kumar, Ambuj Saxena & Sandeep Tiwari (2021) Effect of friction stir processing on microstructural and mechanical properties of lightweight composites and cast metal alloys – A review, International Journal of Cast Metals Research, DOI: 10.1080/13640461.2021.2014667
1.191
12 Ashish Kumar Srivastava, c, Ambuj Saxena, Nagendra Kumar Maurya, Shashi Prakash Dwivedi, Amit Rai Dixit, Microstructural and fractographic analysis of A359/Si3N4 surface composite produced by friction stir processing, International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde), (2021) https://doi.org/10.1515/ijmr-2020-78277753
0.678
13 Ashish Kumar Srivastava, Nag A, Dixit AR, Tiwari S, Scucka J, Zelenak M, Hloch S, Hlavacek P, Surface integrity in tangential turning of hybrid MMC A359/B4C/Al2O3 by abrasive waterjet, Journal of Manufacturing Processes, 2017, 28 11–20. 5.684
14 Ashish Kumar Srivastava, Nag A, Dixit AR, Scucka J, Hloch S, Tiwari S, Klichova D Hlaváček P, Tiwari S, Hardness measurement of surfaces on hybrid metal matrix composite created by turning using abrasive water jet and WED, Measurement, Volume 131, 2019, 628-639. 5.131
15 Ashish Kumar Srivastava, Nag A, Dixit AR, Hloch S, Tiwari S, Scucka J, Surface integrity in wire-EDM tangential turning of in-situ hybrid metal matrix composite A359/B4C/Al2O3, Science and Engineering of Composite Materials, 2018, Volume 26: Issue 1, DOI: https://doi.org/10.1515/secm-2017-0391
1.901
16 Ashish Kumar Srivastava, Dixit AR, Tiwari. S, Investigation of microstructural and mechanical properties of metal matrix composite A359/B4C through electromagnetic stir casting, Indian journal of engineering & materials sciences, 2016, 23 (April & June), 171-180. 0.615
17 Ashish Kumar Srivastava, Dixit AR, Tiwari S, A review on intensification of metal matrix composite and its non-conventional machining, Science and Engineering of Composite Materials, 2016, DOI 10.1515/secm-2015-0287. 1.901
18 Ashish Kumar Srivastava, and Amit Rai Dixit. 2023. "Research Progress in Metals and Alloys by Thermal Layering and Deposition" Coatings 13, no. 2: 366. https://doi.org/10.3390/coatings13020366 3.236
19 Nagendra K Maurya, Ashish K Srivastava, Ambuj Saxena, Shashi P Dwivedi, Mashood Ashraf Ali and Jiyaul Mustafa, Experimental investigation on the effect of laser powder bed fusion process variables on dimensional accuracy, surface roughness and cylindricity of the AlSi10Mg alloy component, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, (2021) DOI: 10.1177/09544089211039046 1.822
20 Nilesh Kumar, Het Bhavsar, P.V.S. Mahesh, Ashish Kumar Srivastava*, Bhaskor J. Bora, Ambuj Saxena, Amit Rai Dixit, Wire Arc Additive Manufacturing – A revolutionary method in additive manufacturing, Materials Chemistry and Physics, Volume 285, 2022, 126144, https://doi.org/10.1016/j.matchemphys.2022.126144 4.778
21 Rishabh Dwivedi, Ashish Kumar Srivastava, Rakesh Kumar Singh, Effect of eggshell waste and B4C particles on the mechanical and tribological properties of Al7075 alloy developed by friction stir processing, Metallurgical Research & Technology, 2022 (Ahead of print) 0.946
22 Nag A, Ščučka J, Hlavacek P, Klichová D, Ashish Kumar Srivastava, Hloch S, Dixit AR, Foldyna J, Zelenak M, Hybrid aluminium matrix composite AWJ turning using olivine and Barton garnet, International journal of advance manufacturing technology, (2017), https: //doi.org /10.1007/ s 00170-017-1036-0. 3.563
23 Nag A, Srivastava A K*, Dixit AR, Mandal A, Das AK, Study of surface integrity and effect of process parameters in wire electrical discharge turning of Ti-6Al-4V, Indian journal of Engineering & Materials Sciences, 2020, Vol.27(2), 267-276. 0.615
24 Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Utilization of Chrome Containing Leather Waste in Development of Aluminium Based Green Composite Material, International Journal of Precision Engineering and Manufacturing-Green Technology (2020) 7:781–790. 4.660
25 Singh, Aditya, Ashish Kumar Srivastava, Gyanendra Singh, Akash Deep Singh, Hritik Kumar Singh, Ajay Kumar, and Gyanendra Kumar Singh. "Utilization of Plastic Waste for Developing Composite Bricks and Enhancing Mechanical Properties: A Review on Challenges and Opportunities." Advances in Polymer Technology 2023 (2023). 2.8
26 Shashi Prakash Dwivedi, Ambuj Saxena, Shubham Sharma, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Influence of SAC and eggshell addition in the physical, mechanical and thermal behaviour of Cr reinforced aluminium based composite, (2021), International Journal of Cast Metals Research, 34:1, 43-55, DOI: 10.1080/13640461.2021.1877943
1.191
27 Ambuj Saxena, Shashi Prakash Dwivedi, Adepu Kumaraswamy, Ashish Kumar Srivastava & Nagendra Kumar Maurya (2020) Influence of SD effect on Johnson–Cook hardening constitutive material model: Numerical and experimental investigation for armor steel, Mechanics of Advanced Materials and Structures, DOI: 10.1080/15376494.2020.1765266.
3.338
28 Ambuj Saxena, Adepu Kumaraswamy, Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Maurya & Mahesh Pandey, Experimental and Numerical Investigation of Quasi-Static (10−3 s−1) Fracture Behavior of Armor Steel, Arabian Journal for Science and Engineering (2020), https://doi.org/10.1007/s13369-020-04519-1.
2.807
29 Ambuj Saxena, A. Kumaraswamy, Shashi Prakash Dwivedi, Ashish Kumar Srivastava*, Nagendra Kumar Maurya, Experimental and computational investigation on dynamic fracture toughness (J1d) behavior of multi-pass SMA armor steel weldments, Theoretical and Applied Fracture Mechanics, Volume 106, 2020, 102502, ISSN 0167-8442, https://doi.org/10.1016/j.tafmec.2020.102502.
4.374
30 Ambuj Saxena, Shashi Prakash Dwivedi, Nagendra Kumar Maurya, Ashish Kumar Srivastava, Investigation on mechanical properties and deformation behavior of copper-based three-phase metal matrix composite: Experimental and micro-macro-mechanical finite element analysis, (2021), Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, DOI: 10.1177/14644207211009254
2.663
31 A. Saxena, S.P. Dwivedi, A. Dixit, S. Sharma, A.K. Srivastava, N.K. Maurya, Computational and experimental investigation on mechanical behavior of zirconia toughened alumina and nickel powder reinforced EN31 based composite material, Material Science and Engineering Technology (Materialwiss. Werkstofftech) 2021, 52, 1–14, DOI 10.1002/mawe.202000152 1.034
32 Dwivedi, Shashi Prakash, Maurya, Nagendra Kumar, Maurya, Manish, Saxena, Ambuj and Srivastava, Ashish Kumar, Optimization of casting parameters for improved mechanical properties of eggshell reinforced composites, Materials Testing, vol. 63, no. 11, 2021, pp. 1041-1051. https://doi.org/10.1515/mt-2021-0044
2.528
33 Saxena, Ambuj; Dwivedi, Shashi; Srivastava, Ashish; SHARMA, SHUBHAM; Kotkunde, Nitin, A Computational Investigation on the Influence of l/d Ratio and Strain Rate on the Deformation Behavior of RHA Steel in the SHPB Test Process, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2021, Volume: 236 issue: 1, page(s): 138-148 1.822
34 Ambuj Saxena, Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Abhishek Sharma, Vinod Kumar Yadav, A Comparatively Numerical Investigation on Heat Transfer Behavior of Different Materials Used for Internal Combustion Engines, International Journal of Engine Research (2022), https://doi.org/10.1177/14680874221112722
2.5
35 Ambuj Saxena, Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Abhishek Kaushik, Shubham Sharma, Micro-Mechanical Finite Element Analysis on Mechanical Behavior of EN31 Steel-Based Metal Matrix Composite, Transactions of the Indian Institute of Metals, Transactions of the Indian Institute of Metals, 2022, https://doi.org/10.1007/s12666-022-02691-6 1.391
36 Nitesh Kumar, Ananda Babu Arumugam, Alok Kumar Das, Ashish Kumar
Srivastava, Evaluation of Elastic Properties of Graphene and Ceramics Reinforced
Epoxy Composite Using Vibration Technique, Coatings 2022, 12(9), 1325; https://doi.org/10.3390/coatings12091325
3.236
37 Rajesh Bajaj, Arun Kumar Tiwari, Alokesh Pramanik, Ashish Kumar Srivastava & Amit Rai Dixit, Machining performance and sustainability analysis of PMEDM process using green dielectric fluid, Journal of the Brazilian Society of Mechanical Sciences and Engineering volume 44, Article number: 563 (2022), https://doi.org/10.1007/s40430-022-03878-0 2.361
38 Mukul Saxena, Anuj Kumar Sharma, Ashish Kumar Srivastava, Rabesh Kumar Singh, Amit Rai Dixit, Akash Nag, Sergej Hloch, Microwave-Assisted Synthesis, Characterization and Tribological Properties of a g-C3N4/MoS2 Nanocomposite for Low Friction Coatings. Coatings. 2022; 12(12):1840. https://doi.org/10.3390/coatings12121840 3.236
39 Saxena, Mukul, Anuj Kumar Sharma, Ashish Kumar Srivastava, Narendra Singh, and Amit Rai Dixit. "An Investigation for Minimizing the Wear Loss of Microwave-Assisted Synthesized g-C3N4/MoS2 Nanocomposite Coated Substrate." Coatings 13, no. 1 (2023): 118. 3.4
40 Kumar N, Singh RK, Srivastava AK, Nag A, Petru J, Hloch S. Surface Modification and Parametric Optimization of Tensile Strength of Al6082/SiC/Waste Material Surface Composite Produced by Friction Stir Processing. Coatings. 2022; 12(12):1909. https://doi.org/10.3390/coatings12121909 3.236
41 Saxena, M.; Sharma, A.K.; Srivastava, A.K.; Singh, N.; Dixit, A.R. An Investigation for Minimizing the Wear Loss of Microwave-Assisted Synthesized g-C3N4/MoS2 Nanocomposite Coated Substrate. Coatings 2023, 13, 118. https://doi.org/10.3390/coatings13010118 3.236
42 Singh, R.K.; Shindhe, M.; Rawat, P.; Srivastava, A.K.; Singh, G.K.; Verma, R.; Bhutto, J.K.; Hussein, H.S. The Effect of Various Contaminants on the Surface Tribological Properties of Rail and Wheel Materials: An Experimental Approach. Coatings 2023, 13, 560. https://doi.org/10.3390/coatings13030560 3.236
43 Majid, Mohd, Love Goel, Abhinav Saxena, Ashish Kumar Srivastava, Gyanendra Kumar Singh, Rajesh Verma, Javed Khan Bhutto, and Hany S. Hussein. "Firefly Algorithm and Neural Network Employment for Dilution Analysis of Super Duplex Stainless Steel Clads over AISI 1020 Steel Using Gas Tungsten Arc Process." Coatings 13, no. 5 (2023): 841. 3.4
44 Nag, Akash, Madhulika Srivastava, Jana Petrů, Petra Váňová, Ashish Kumar Srivastava, and Sergej Hloch. "Comparison of Continuous and Pulsating Water Jet during Piercing of Ductile Material." Materials 16, no. 9 (2023): 3558. 3.4
45 Abhishek Kaushal, Anuj Kumar Sharma, Ashish Kumar Srivastava, Gyanendra Kumar Singh, Color-Coded Light Signals Based Communication for Swarming Behaviors in Mobile Robotic System, Journal of Sensors, Volume 2023 | Article ID 8660847 | https://doi.org/10.1155/2023/8660847 1.9
S. No. Scopus Indexed SJR
1 Mukul Saxena, Anuj Kumar Sharma, Ashish Kumar Srivastava, Monika Singh, Kuldeep Kumar Saxena Chandar Prakash, Mayada Ahmed Abass, Modeling and Analysis of K15 Hollow Glass Microballoons filled Epoxy Syntactic Foam for Lightweight Structures,
International Journal on Interactive Design and Manufacturing, Springer (Accepted: 10:03:23)
2 Saxena, M., Sharma, A. K., Srivastava, A. K., Dixit, A. R., Singh, N., & Singh, M. (2023). Microwave-Assisted vs. Conventional Hydrothermal Synthesis, Morphology, Microstructure, and Surface Area Analysis of g-C3N4/MoS2 Nanocomposite. In A. Kumar, P. Kumar, A. Srivastava, & V. Goyat (Eds.), Modeling, Characterization, and Processing of Smart Materials (pp. 151-164). IGI Global. https://doi.org/10.4018/978-1-6684-9224-6.ch007
3 Tiwari, H. K., Srivastava, A. K., Kumar, P., Singh, M. K., Kumar, H., & Bhadauria, A. (2023). Materials and Technology for Implant Manufacturing: Challenges and Opportunity. In A. Kumar, P. Kumar, A. Srivastava, & V. Goyat (Eds.), Modeling, Characterization, and Processing of Smart Materials (pp. 83-106). IGI Global. https://doi.org/10.4018/978-1-6684-9224-6.ch004
4 Goswami, E., Srivastava, A. K., Kumar, A., Salman, M., Choudhary, M. Z., & Pandey, S. S. (2023). Review of Microstructural and Mechanical Properties of Microwave Welding of Lightweight Alloys. In A. Kumar, P. Kumar, A. Srivastava, & V. Goyat (Eds.), Modeling, Characterization, and Processing of Smart Materials (pp. 185-204). IGI Global. https://doi.org/10.4018/978-1-6684-9224-6.ch009
5 Ashish Kumar Srivastava, Ambuj Saxena, Brijesh Sharma, Numerical study of tensile strength and hardness of the AA1100/graphene MMC produced by stir casting, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.04.162. 0.3
6 Srivastava, A.K., Sharma, B., Saju, B.R., Shukla, A., Saxena, A. and Maurya, N.K. (2020). Effect of Graphene nanoparticles on microstructural and mechanical properties of aluminum based nanocomposites fabricated by stir casting, World Journal of Engineering, 17(6): 859-866.
0.18
7 Ashish Kumar Srivastava, Manish Maurya, Ambuj Saxena, Nagendra Kumar Maurya, Shashi Prakash Dwivedi, Statistical Optimization by Response Surface Methodology of Process Parameters During the CNC Turning Operation of Hybrid Metal Matrix Composite, EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 2021, Vol. 08, Issue 01, pp 51-62, 0.23
8 Srivastava, A.K., Saxena, A., Maurya, N.K., Dwivedi, S.P. (2021). Microstructural and mechanical properties of AZ31B/graphene nanocomposite produced by stir casting. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials, Vol. 31, No. 1, pp. 51-56. https://doi.org/10.18280/rcma.310107 0.146
9 Ashish Kumar Srivastava, Akash Dubey, Manish Kumar, Shashi Prakash Dwivedi, Rabesh Kumar Singh, Sanjay Kumar, Measurement of Form Errors and Comparative Cost Analysis for the Component Developed by Metal Printing (DMLS) and Stir Casting, Instrumentation Mesure Métrologie, (2020), Vol. 19, No. 5, pp. 363-369. https://doi.org/10.18280/i2m.190506. 0.132
10 Ashish Kumar Srivastava, Shashi Prakash Dwivedi, Nagendra Kumar Maurya, Manish Maurya, (2020), 3D Visualization and Topographical Analysis in Turning of Hybrid MMC By CNC Lathe SPRINT 16TC Made of BATLIBOI, EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Vol. 07, Issue 02, pp202-208. 0.23
11 Srivastava, A.K., Dwivedi, S.P., Maurya, N.K., Sahu, R. (2020). Surface roughness report and 3D surface analysis of hybrid Metal Matrix Composites (MMC) during Abrasive Water Jet (AWJ) cutting. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials, Vol. 30, No. 3-4, pp. 169-174. 0.132
12 Ashish Kumar Srivastava, Nagendra Kumar Maurya, Manish Maurya, Shashi Prakash Dwivedi, Ambuj Saxena, Effect of Multiple Passes on Microstructural and Mechanical Properties of Surface Composite Al 2024/SiC Produced by Friction Stir Processing, Annales de Chimie-Science des Matériaux, (2020), Volume 44, Issue 6, Pages, 421-426 0.134
13 Ashish Kumar Srivastava, Vaibhaw Dixit, Ambuj Kumar Rai, Sunny Sharma, Arpit Sharma, Vishal Shankar Srivastava, Study of microstructural and mechanical properties of the component produced by friction stir additive manufacturing (FSAM)-A review, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.08.339. 0.3
14 Rishabh Dwivedi, Rakesh Kumar Singh, Sanjay Kumar, Ashish Kumar Srivastava, Parametric optimization of process parameters during the friction stir processing of Al7075/SiC/waste eggshell surface composite, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.03.545. 0.3
15 Tarun Gupta, Ashish Kumar Srivastava, Vishal Shankar Srivastava, Microstructural and Tensile Behaviour of Hybrid MMC Al7075/ SiC/B4C Produced by Mechanical Stir Casting, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.06.430 0.3
16 Rishabh Dwivedi, Rakesh Kumar Singh, Ashish Kumar Srivastava, Anshu Anand, Sanjay Kumar, Anurag Pal, Statistical Optimization of Process Parameters During the Friction Stir Processing of Al7075/Al2O3/waste Eggshell Surface Composite, (2021), Recent Trends in Industrial and Production Engineering, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981-16-3330-0_9 0.17
17 Rakesh Kumar Singh, Ashish Kumar Srivastava, and Dheerendra Kumar Singh, Microstructural and X-ray Diffraction Analysis of Surface Composite AZ31b/MgO/B4C Produced by Friction Stir Processing, (2021), Recent Trends in Industrial and Production Engineering, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981-16-3330-0_3 0.17
18 Sanjay Kumar, Ashish Kumar Srivastava, Rakesh Kumar Singh, Fabrication of AA7075 Hybrid Green Metal Matrix Composites by Friction Stir Processing, 2020, Journal Annales de Chimie-Science des Matériaux, Volume 44,Issue 4, Pages 295-300 0.134
19 Om Prakash, Suryank Dwivedi, Shravan Pagrut, Manvendra Singh Rajawat, Ratnesh Raj, Ashish Kumar Srivastava, Amit Rai Dixit, Investigation on the friction stir assisted lap joining of pure copper and aluminium 6063 alloy, Materials Today: Proceedings, 2022, https://doi.org/10.1016/j.matpr.2022.04.716. 0.3
20 Nikhil Phadke, Ratnesh Raj, Ashish Kumar Srivastava, Suryank Dwivedi, Amit Rai Dixit, Modeling and parametric optimization of laser powder bed fusion 3D printing technique using artificial neural network for enhancing dimensional accuracy, Materials Today: Proceedings, Volume 56, Part 2, 2022, Pages 873-878, https://doi.org/10.1016/j.matpr.2022.02.523. 0.3
21 R. Srivastava, P. S. Bahadur, S. Jaiswal, A. Kumar and A. K. Srivastava, "Review: Combating High Temperature Challenges using Pyrosic Material," 2022, IEEE Explore, 2nd International Conference on Innovative Practices in Technology and Management (ICIPTM), 2022, pp. 411-415, doi: 10.1109/ICIPTM54933.2022.9754054. 0.2
22 Srivastava A.K., Nag A., Dixit A.R., Tiwari S., Srivastava V.S. (2019) Parametric Study During Abrasive Water Jet Turning of Hybrid Metal Matrix Composite. In: Hloch S., Klichová D., Krolczyk G., Chattopadhyaya S., Ruppenthalová L. (eds) Advances in Manufacturing Engineering and Materials. Lecture Notes in Mechanical Engineering. Springer, Cham, https://doi.org/10.1007/978-3-319-99353-9_9. 0.17
23 Ashish Kumar Srivastava, Yash Gupta, Saurabh Patel, Sachin Kumar Tiwari, Shubham Pandey, Metal matrix composites-a review on synthesis and characterization, IOP Conference Series: Materials Science and Engineering, 691 (2019) 012077, doi:10.1088/1757-899X/691/1/012077.
0.2
24 Ashish Kumar Srivastava, Rakesh Kumar Singh, Sanjay Kumar, Shashi Prakash Dwivedi , Nagendra Kumar Maurya , Shivam Mishra (2019), Development of duralumin alloy and its microstructural characterization by using grain refiner. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2019.12.027.
0.3
25 Ashish Kumar Srivastava, Shashi Prakash Dwivedi, Nagendra Kumar Maurya, Nilesh Kumar (2019), Experimental observations of elements of surface integrity during conventional turning of commercial pure titanium. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2019.07.379.
0.3
26 Ashish Kumar Srivastava, (2019), Assessment of mechanical properties and EDM machinability on Al6063/SiC MMC produced by stir casting, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2019.07.429.
0.3
27 Sanjay Kumar, Ashish Kumar Srivastava, Rakesh Kumar Singh, Shashi Prakash Dwivedi, Experimental study on hardness and fatigue behavior in joining of AA5083 and AA6063 by friction stir welding, Materials Today: Proceedings, Volume 25, Part 4, 2020, Pages 646-648. 0.3
28 Maurya, N.K., Maurya, M., Dwivedi, S.P., Srivastava, A.K., Saxena, A., Chahuan, S., Tiwari, A. and Mishra, A. (2021), "Investigation of effect of process variable on dimensional accuracy of FDM component using response surface methodology", World Journal of Engineering, Vol.18, No.5, pp.710-719.
0.18
29 Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Rohit Sahu (2020), Microstructure and Mechanical Behaviour of Al/SiC/Agro-Waste RHA Hybrid Metal Matrix Composite. Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials. 30(1): pp. 43-47. 0.132
30 Shashi Prakash Dwivedi, Manish Maurya, Nagendra Kumar Maurya, Ashish Kumar Srivastava, Satpal Sharma, Ambuj Saxena (2020), Utilization of Groundnut Shell as Reinforcement in Development of Aluminum Based Composite to Reduce Environment Pollution: a review. EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy. 07 (01): 15-25. 0.23
31 Vishal Shankar Srivastava, Tarun Kumar Gupta, Ashish Kumar Srivastava, Sandeep Chauhan, Pankaj Kumar Chauhan, Effects of cutting parameters on aluminium alloys-A review, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.03.091. 0.3
32 Anurag Pal, Anuj Dixit, Ashish Kumar Srivastava, Design and optimization of the shape of electrostatic precipitator system, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.03.448 0.3
33 Shashi Prakash Dwivedi, Rohit Sahu, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Avdhesh Tyagi, Rajesh Kumar Maurya (2019). Machining and thermal behaviour of thermal power plant waste reinforced composite material. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2019.08.027.
0.3
34 Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Manish Maurya (2019), Microstructure and Mechanical Properties of Al 6061/Al2O3/Fly-Ash Composite Fabricated Through Stir Casting. Annales de Chimie - Science des Matériaux. 43(5): pp. 341-346. 0.134
35 Shashi Prakash Dwivedi, Ashish Kumar Srivastava, Nagendra Kumar Maurya, Rohit Sahu, Avdhesh Tyagi, Rajesh Maurya (2019), Microstructure and mechanical behaviour of Al/SiC/Al2O3 hybrid metal matrix composite. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2019.09.023.
0.3
36 Nagendra Kumar Maurya, Manish Maurya, Ashish Kumar Srivastava, Shashi Prakash Dwivedi, Abdhesh kumar, Sandeep Chauhan (2019), Investigation of mechanical properties of Al 6061/SiC composite prepared through stir casting technique. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2019.09.003.
0.3
37 Srivastava. AK, Nag A, Mardi KB, Dixit AR, Tiwari S, Zelenak M, Experimental investigation of wire EDM machining performance of in-situ hybrid metal matrix composite using response surface methodology and desirability approach, Proceedings of Materials Today, 2017, Accepted for Publication. 0.3
38 Ashish Kumar Srivastava, A description of surfaces created on the hybrid MMC by the AWJ cutting technology, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001, Vol. 8, Issue 6, Dec 2018, 715-720. 0.2
39 Ashish Kumar Srivastava, Statistical optimization of wire-EDM during processing of hybrid MMC, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001, Vol. 8, Issue 6, Dec 2018, 783-792. 0.2
40 Nag A, Srivastava AK, Dixit AR, Chattopadhyaya S, Mandal A, Influence of abrasive water jet turning parameters on variation of diameter of Metal Matrix Composite, Lecture Notes in Mechanical Engineering, 2018, https://doi.org/10.1007/978-981-10-5329-0_36. 0.17
41 Mardi KB, Dixit AR, Srivastava AK, Mallick A, Effect of water pressure during machining of Mg-based nanocomposites by abrasive water-jet machining, Lecture Notes in Mechanical Engineering, 2018, https://doi.org/10.1007/978-981-10-5329-0_46. 0.17
42 Nag A, Srivastava AK, Dixit AR, Mandal A, Das AK, Surface integrity analysis of wire-EDM on in-situ hybrid composite A359/Al2O3/B4C, Materials today Proceedings, 5 (2018) 24632–24641. 0.3
43 Tanmay Tiwari, Saket Sourabh, Akash Nag, Amit Rai Dixit, Amitava Mandal, Alok Kumar Das, Niladri Mandal, Ashish Kumar Srivastava, Parametric investigation on abrasive waterjet machining of alumina ceramic using response surface methodology, IOP Conference Series: Materials Science and Engineering, 2018, 377(1), 012005
0.2
44 Saket Saurabh,Tanmay Tiwari, Akash Nag, A R Dixit, Niladri Mandal, AK Das, Amitava Mandal, Ashish Kumar Srivastava, Processing of alumina ceramics by abrasive waterjet-an experimental study, Materials Today: Proceedings, 2018, 5(9), pp. 18061–18069 0.3
45 Rishabh Dwivedi, Rakesh Kumar Singh, Sanjay Kumar, Ashish Kumar Srivastava, Parametric optimization of process parameters during the friction stir processing of Al7075/SiC/waste eggshell surface composite, Materials Today: Proceedings, 2021, https://doi.org/10.1016/j.matpr.2021.03.545. 0.3
46 Aman Verma, Himanshu Yadav, Kuldeep Kumar, Prince Kumar Singh, Mayank Sharma, Vishal Shankar Srivastava, and Ashish Kumar Srivastava, State of Art on Microstructural and Mechanical Characterization of Wire and Arc Additive Manufacturing (WAAM), (2021), Computational and Experimental Methods in Mechanical Engineering, Smart Innovation, Systems and Technologies 239, https://doi.org/10.1007/978-981-16-2857-3_12 0.17
47 Mohd Rizwan Jafar and Ashish Kumar Srivastava, A review on elicit potentials in the brain to recognize Brain-Machine interface 2021, J. Phys.: Conf. Ser. 2007, 012048, https://doi.org/10.1088/1742-6596/2007/1/012048
0.23
S.No. Other Peer reviewed publications
1 Sarvesh Kumar, Ashish Kumar Srivastava, Microstructural Properties of Al-Cu-Mg Taylor-made functionally graded layer by Friction Stir Additive Manufacturing, International Journal of Advance Research and Innovative Ideas in Education, Vol.8, Issue 4, 2022
2 Sarvesh Kumar, Ashish Kumar Srivastava, Mechanical Properties of Al-Cu-Mg Taylormade functionally graded layers by Friction Stir Additive Manufacturing, International Journal of Advance Research and Innovative Ideas in Education, Vol.7, Issue 6, 2021
3 Srivastava. A, Dixit. A.R., Tiwari. S, Experimental Investigation of Wire EDM Process Parameters on Aluminium Metal Matrix Composite Al2024/SiC, International Journal of Advance Research and Innovation, Volume 2 (2014) 511-515. [Non paid peer reviewed].
4 Madheshiya S., Srivastava. A, Dixit. A.R., Tiwari. S, A Review on Fabrication and Characterization of Composite Material and its Buckling Analysis through FEM, International Journal of Advance Research and Innovation, Volume 2, issue 1, (2014) 185-193. [None paid peer reviewed].
5 Srivastava. A, Dixit. A.R., Tiwari. S, A Review on Fabrication and Characterization of Aluminium Metal, Matrix Composite (AMMC), International Journal of Advance Research and Innovation, Volume 2 (2014) 516-521. [None paid peer reviewed].
6 Srivastava. A, Garg. P. Kumar. A., Krishna.Y. Varsney. K.K, A Review on Fabrication & Characterization of Hybrid Aluminium Metal Matrix Composite, International Journal of Advance Research and Innovation, Volume 2, issue 1, (2014) 242-246. [None paid peer reviewed].
7 Ashish Kumar Srivastava, S.P. Dwivedi, Abhishek Sharma, Nagendra Kumar Maurya, Prabhat Ranjan, A Review on Surface Integrity in Machining of Hard Materials, International Journal of Engineering & Technology, 7 (4.39) (2018) 434-437.
8 Shashi Prakash Dwivedi, Rohit Sahu, Ashish Kumar Srivastava, Microstructure and Thermal Expansion behaviour of hybrid composite material, International Journal of Engineering & Technology, 7 (4.39) (2018), 420-422.
9 Shashi prakash Dwivedi, Abhishek Sharma, V.R. Mishra, Ashish Kumar Srivastava, Application of central composite design in turning operation of composite materials for better surface finish with appropriate rake angle, International Journal of Engineering & Technology, 7 (4.39) (2018), 423-426.
10 Nagendra Kumar Maurya, Manish Maurya, Rajesh Kumar Maurya, Ashish Kumar Srivastava, Dynamic Modeling and simulation of shock absorber system for the two wheeler vehicle, International Journal of Engineering & Technology, 7 (4.39) (2018), 413-416.
11 Yashvir Singh, Abhishek Sharma, S.P. Dwivedi, V.R.Mishra, Ashish Kumar Srivastava, Influence of sliding speed on the tribological characteristic of pongamia oil with TiO2 nanoparticles, International Journal of Engineering & Technology, 7 (4.39) (2018), 155-157.
12 Rohit Sahu, Ashish Srivastava, A Review of Application and Use of Dissimilar Metal Welding, Indian Journal of Science and Technology, 2019, Volume: 12, Issue: 11, Pages: 1-4
S.No. International Conferences papers
1 Srivastava A., Singh H., Dubey A.P., Kumar A., Kakkar D., An Extensive study of Fabrication and Characterization of Aluminium Metal Matrix Composite (AMMC), 2nd International conference on Technological and Management Advances in the new age economy, ISBN: 978-93-5156-339-6. (2014).
2 Srivastava A., Gupta R., Kumar P., Bhadauriya S., Raza R. Mohd., Review on Design analysis and fabrication of Stirling engine, 2nd International conference on Technological and Management Advances in the new age economy, ISBN: 978-93-5156-339-6.(2014).
3 Srivastava A, Kumar Ajay, Application of neural network for solving of inverse kinematics problems of a machine elements, International conference on THERMAL ENERGY AND ENVIRONMENT – INCOTEE 2011, Held at Kalasalingam University, Madurai, Tamilnadu, India.
4 Srivastava A., Singh R.K., Agarwal G.K., Diwedi S.P., Sharma S., Optimization of Cutting Parameters on CNC Lathe to Improve the Surface Roughness by Response Surface Methodology (RSM), International Conference on Manufacturing Excellence (MANFEX-2013), ISBN: 978-93-83083-17-6.
5 Srivastava A. and Kumar Ajay, an Optimization Technique to Solve the Inverse Kinematics of Robot Manipulator, International Conference on Manufacturing Excellence (MANFEX-2013), ISBN: 978-93-83083-17-6.
6 Madheshiya S., Srivastava. A, Dixit. A.R., Tiwari. S, A Review on Fabrication and Characterization of Composite Material and its Buckling Analysis through FEM, International Conference of Advance Research and Innovation,2014, ISBN 978-93-5156-328-0.(2014).
7 Singh. D, Srivastava A., Verma G., Chauhan M., Gupta A., Innovative Design of Multi Jaw Wrench and its Analysis, International Conference on Manufacturing Excellence (MANFEX-2013), ISBN: 978-93-83083-17-6.
8 Vishal Shankar Srivastava, Ashish Kumar Srivastava, Sandeep Kumar Singh, Akash Nag, RV Patel, Effect of Process Parameter on diametric deviation during CNC lathe turning of EN-31 Steel, Proceedings of International conference on computational and Experimental methods in Mechanical Engineering, DEC-2017, page- 600-606, Held at GL BAJAJ Institute of Technology, Greater Noida.
9 Vishal Shankar Srivastava, Ashish Kumar Srivastava, Akash Nag, Rakesh Kumar Singh, Devendra Kumar Yadav, Sushil Kumar Madheshiya, Surface roughness a measurement of in-situ metal matrix composite Al7075/B4C, Proceedings of International conference on computational and Experimental methods in Mechanical Engineering, DEC-2017, page- 600-606, Held at GL BAJAJ Institute of Technology, Greater Noida.
10 Rakesh Kumar Singh, Ashish Kumar Srivastava, Geeta Pal, Experimental analysis of electric discharge machining parameters and optimization of surface roughness, International conference on Cutting edge technological challenges in Mechanical Engineering, Held at NIET in Mar-2017.
11 Rakesh Kumar Singh, Ashish Kumar Srivastava, Osama lari, Parametric optimization of powder mixed electro-discharge machining by using Taguchi method, International conference on Cutting edge technological challenges in Mechanical Engineering at NIET in Mar-2017.
12 Rupesh Kumar Mishra, Ashish Kumar Srivastava, Kapil kumar, Rakesh Kumar Singh, Effect of Die-punch assembly on the mechanical properties of metal matrix composite produced by Electromagnetic Stir casting, International conference on Cutting edge technological challenges in Mechanical Engineering at NIET in Mar-2017.
13 Sharma S., Srivastava A., Kumar A., Fabrication of natural composite fiber and study of its Properties, 2nd International conference on Technological and Management Advances in the new age economy, ISBN: 978-93-5156-339-6.(2014).
|
